NEWS

The excavated mine shaft The excavated mine shaft CREDIT: New Zealand Transport Agency

Update on SH25 mine shaft hole

Saturday 28 April 2012, 4:37AM
By New Zealand Transport Agency
328 views


THAMES

State Highway 25 at the north end of Thames will remain closed until repairs are completed to cover an old pump shaft that was exposed when the road sank last week.

NZ Transport Agency Waikato State Highway Manager Kaye Clark says the shaft is the same location as a smaller hole which appeared in the road in January this year.

"When we excavated the hole in January initial investigations indicated that the shaft had been back filled and it seemed some settlement in the fill was what caused the road to sink. This time we have excavated much further and have now exposed the full extent of an old pump shaft.”

Historic records indicate that this may be the site of the first 'Big Pump’, constructed for the Thames goldfield in 1872 and closed down in the early 1900’s.

The shaft is about 6m by 4m and it is unknown if it had been back filled previously or how it was covered over as there is at least 5 metres of water in the shaft. Local historians have been involved and discussions are also being held with the Historic Places Trust to ensure that the shaft is well documented and recorded.

"The hole will require bridging over to allow the road to be reinstated and design work on this is currently underway. It is essential that we provide a long term solution and having to span such a wide opening so as not to put any loading on the shaft’s walls is providing our engineers with some challenges".

Mrs Clark says until this work is underway it is not possible to say how long the highway will remain closed, however the NZTA will be carrying out the work swiftly as possible to minimise disruption to traffic. A short local detour is in place and is not expected to cause significant delays for motorists.